Corrosion Metal corrosion protection tapes, protection tape for metal pipeline 
Composition: It is tape-shaped anticorrosion material made of Polyethylene film heat laminated with adhesive layer of butyl glue. 
Usage: It is extensively used in the pipework of oil and natural gas transportation, petrochemical industry, electric power, metallurgy, urban natural gas network of pipes, the outside anticorrosion project of the metal pipes involved as well as the outside anticorrosion project of the underground and overhead metallic conduit of the works of petrochemical industry, natural gas and coal transportation 
Thickness: 0.30 - 1.30mm 
Width: 50, 75, 100, 150, 230, 300mm 
Length: 30 - 240m 
Features: 
Excellent adhesion to pipe and self 
Resistant to UV 
Can be applied over a wide temperature range 
Good conformability and consistent uniform thickness 
Easily applied with no special equipment 
Compatible with common pipe coatings 
Excellent resistance to cathodic disbonding 
Meets ASTM D1000 Standard 
Cold applied 
Application: 
Prepare surfaces by removing all loose scale, rust or other foreign matter by grit blasting or wire brush. Surface must be clean, dry and free of grease. Apply thin film of Butyl Primer to all surfaces to be wrapped and allow to dry. Peel back interleaving and apply adhesive side of the tape to the surface and press down. Apply the tape spirally with enough tension to